FREE STANDARD SHIPPING on all orders $100+ with code FREESHIP100
Due to Coronavirus related restrictions, we cannot guarantee shipping/transit times.
We apologize for any inconvenience.
0

OF16S-L | Multi-Surface Planetary 16" Concrete Floor Resurfacing Grinder & Sander | Single Speed Low

Availability: in stock

SKU: 468169

$4,595.00

Are you in the middle of a construction project, and you need a quick tool to remove epoxy and mastic coatings from the concrete floor? Onfloor Technologies have got you covered.

 

The Onfloor OF16S-L is a multi-surface planetary concrete floor grinder, exterior wood deck sander, interior wood floor sander equipped with Onfloor’s patented triple-belt planetary technology.

 

The OF16S-L operates on 110-120V and is powerful enough for professional users yet simple enough for almost anyone to operate and maintain. The low tool speed (500 rpm) of the OF16S-L makes it an ideal multi-surface machine for low-speed applications such as wood floors and decks.

 

The OF16S-L also incorporates Onfloor’s patented tool attachment system known for being the fastest tool change in the industry.

 

Tooling packages are available for a multitude of applications, including:

Concrete Surface Preparation | Epoxy Removal | Mastic/Glue Removal 

Wood Floor Sanding/Refinishing | Stone Polishing | Wood Deck Restoration
 

Model

OF16S-L

Motor/Power 

1.5 HP/ 110-120V 50/60HZ

Full Load Amperage

12.5

Tool Speed

500 RPM

Cutting Width

16"

Vacuum Port

1.5"

Minimum CFM

150

Weight

160 LBS

Grinding Pressure

140 LBS

Optional Weight

20 LBS (2 max)

Shipping Dimension

L: 31" x W:23" x H: 48"

Shipping Weight

165 LBS


DOWNLOAD THE PRODUCT MANUAL HERE

Related Items

Deck Nylon Brush 6.5" (3 per box)

The Deck Nylon Brush 6.5" quickly cleans many outdoor surfaces including wood, composite, brick, ...

The Deck Nylon Brush 6.5" quickly cleans many outdoor surfaces including wood, composite, brick, stone, tile, and concrete. It won't damage wood the way pressure washers can, and its stiff bristles gently remove stubborn dirt while the water washes it away. Use with a deck cleaner to help bring back woods' natural beauty and prep it for staining. The Onfloor Deck Brush is a nylon brush impregnated with tungsten carbide steel. The nylon bristles can ride right over the top of cupped deck board...

$411.00

Hook and Loop Pad Driver 6.5" (3 per pack)

6.5" Gel Drive Hook & Loop Pad (3 pack) for OF20 Heavy Duty Series (for machines purchased af...

6.5" Gel Drive Hook & Loop Pad (3 pack) for OF20 Heavy Duty Series (for machines purchased after April of 2015) and OF30 PRO Models. The drive system in the OF20 and OF30 PRO Models will undoubtedly feel better with these 3 replacement pads. If your OF20 series and OF30 PRO Models machine needs a replacement hook & loop pad, Onfloor technologies have the best kit to keep it going. Using other traditional gel drive pad would not last as long as the ones from the Onfloor Technologies st...

$205.00

QuickTool Receiver Plate 7" (3 per box)

Purchase the only quick tool receiver plate replacement for OF 16" models. The Quick Tool Receive...

Purchase the only quick tool receiver plate replacement for OF 16" models. The Quick Tool Receiver Plate helps to replace your old plates for our new Receiver Plate. The average set of scarifiers lasts about 2,000 to 4,000 square feet. It removes thin-set coatings from concrete floors. The replacement kit comes with durable drivers and accessory pins.

$281.00

25 Grit Quick Tool RipTip-1 Diamond (3 per Box)

The Onfloor Quick Tool RipTip is a special diamond abrasive that is available with one, two, or t...

The Onfloor Quick Tool RipTip is a special diamond abrasive that is available with one, two, or three Segment Tips. Each of the RipTip tools is designed to work with specific Onfloor machines based on its down pressure to provide amazing results and maximum duration. The duration is a calculated average that can change with job-site conditions.  The RipTip-1 includes a single segment tip and is designed to work with Onfloor's 16" machine models, 150 lb. max. The 25 Grit Quick Tool RipTip-1  t...

$105.00

25 Grit Quick Tool Single Round Cha-Ching Diamonds (9 per box)

Ever wondered why heavy stock remains stuck on your concrete after using traditional removals? Me...

Ever wondered why heavy stock remains stuck on your concrete after using traditional removals? Meet the 25 Grit Quick Tool Single Round Cha-Ching Diamond, which comes 9 per box and requires quick tool receiver plates. It was designed for use with Onfloor 16, 20, 30 inches, and edger quick change abrasive receiving plate driver. The tool can endure even the most challenging jobs. With a full range of Onfloor precision-engineered metal abrasive, you can be sure your concrete floor will have an ...

$248.00