o you need a multi-surface planetary machine for mastic removals? The Onfloor OF16Pro is a multi-surface planetary machine that is equipped with Onfloor’s patented triple-belt technology.
The platform quickly transforms to become a concrete floor grinder, a concrete and stone floor polisher, a wood floor sander, and a wood deck resurfacer in seconds by changing the tooling.
The OF16Pro can prepare concrete for a coating, remove paint or coat from concrete, remove mastic and glue from concrete, refinishing interior wood floor surfaces, remove worn finishes from wood surfaces, and flattening wood surfaces, preparing exterior decks, and much more.
These applications require very different tools, and these tools require specific operating speeds to reach peak efficiency. The 16Pro was built with professional contractors in mind and provided variable speed control (0-1450rpm), varying weight, and the fastest tool change process. The OF16Pro allows contractors to be incredibly diverse with minimal training.
Tooling packages are available for a multitude of applications, including:
Concrete Surface Preparation | Epoxy Removal | Mastic/Glue Removal
Wood Floor Sanding/Refinishing | Stone Polishing | Wood Deck Restoration
Features
16” Cutting Path: More production in less time.
Multi-surface Capability: Grind Concrete, Stone, Terrazzo, Wood Floors, Wood Decks, and more.
Lightweight High Speed: Faster operation and easy mobilization.
Up To 195 lbs. Grinding Pressure: Increases productivity with more grinding pressure.
Variable Speed Control: Maximizes efficiency by adjusting speed to application requirements.
Removable Handle: Reduces overall height for mobilization.
Self-Maintenance Platform: Replace belts and bearings in minutes, not hours.
Wet/Dry Operation: The machine operates dry with a dust collector or wets with water.
Patented Flexible Tool Plates: Follow the contour of the floor for faster production.
Patented Triple Belt Planetary: Creates more torque with less power.
Model |
OF16Pro |
Motor/Power |
2 HP/ 110-120V 50/60HZ |
Full Load Amperage |
16 |
Tool Speed |
0-1450 RPM Variable |
Cutting Width |
16" |
Vacuum Port |
1.5" |
Minimum CFM |
150 |
Weight |
175 LBS |
Grinding Pressure |
155 LBS |
Optional Weight |
20 LBS (2 max) |
Shipping Dimension |
L: 30" x W:24" x H: 42" |
Shipping Weight |
195 LBS |
- OF16 KEVLAR BELTS 210L 3/SET
- GROMMET WHITE 24/SET
- OF16 DUST SKIRT
- ACCESSORY PINS 12/SET
- TOGGLE ON/OFF SWITCH
- BEARING, PULLEY, TRIPLE LIP SEAL, 1.57" OD x .47" ID
- SPACER, PULLEY BEARING
- BEARING, BOWL, TRIPLE LIP SEAL, 6009-2RS
- SPACER, BOWL BEARING
- 20lb WEIGHT FOR OF16
- BASEPLATE ASSEMBLY 6.5"
- HI 48 TOOTH PULLEY CLOSEST TO THE DUST COVER
- MID 48 TOOTH PULLEY
- LOW 48 TOOTH PULLEY CLOSEST TO THE INNER BOWL
- CENTER 14 TOOTH PULLEY
- Choosing a selection results in a full page refresh.
- Opens in a new window.